Sony GTK-XB7 Manual De Instrucciones página 26

Ocultar thumbs Ver también para GTK-XB7:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

6
Press SPEAKER ADD on
system  repeatedly to
select the output mode.
The SPEAKER ADD L/R indicators
on both systems show the current
output mode.
Each time you press SPEAKER ADD,
the output mode changes as
follows.
 : Double mode
(stereo/stereo)
 : Stereo mode (L ch/R ch)
 : Stereo mode (R ch/L ch)
Hint
To change the output mode, operate
system  (master system), on which
you have activated the speaker add
mode.
26
GB
Playing music with two systems
1
Activate the pairing mode on
system , and then perform
the BLUETOOTH connection
with a BLUETOOTH device.
For details on the pairing, see
"Pairing this system with a
BLUETOOTH device" (page 15)
or "One Touch BLUETOOTH
Connection by NFC" (page 17).
Make sure to pair the BLUETOOTH
device with system  (master
system).
2
Start playback on the
BLUETOOTH device, and
adjust the volume.
For details, see "Listening to
music on a BLUETOOTH device"
(page 16).
Volume adjustments made on
either one of the systems are also
reflected on the other system.
Notes
• If any other BLUETOOTH device(s), such
as a BLUETOOTH mouse or BLUETOOTH
keyboard, is connected to the BLUETOOTH
device that is connecting with the system,
there may be distorted sound or noise in
the system output. In this case, terminate
the BLUETOOTH connection between the
BLUETOOTH device and other BLUETOOTH
device(s).
• If you reset one of the two systems while
using the speaker add function, make
sure to turn off the other system. If you
do not turn off the other system before
restarting the speaker add function, there
may be problems in making a BLUETOOTH
connection and outputting sound.
To deactivate the speaker add
function
Hold down SPEAKER ADD until the
SPEAKER ADD L/R indicators are
turned off.
Hint
Unless you deactivate the function, the
system will try to establish the last made
connection next time you turn on the
system.

Publicidad

Tabla de contenido
loading

Tabla de contenido