Descargar Imprimir esta página

Hansgrohe Vernis Blend Vario Wallbar Set 04970 0 Serie Instrucciones De Montaje / Manejo / Garantía página 2

Ocultar thumbs Ver también para Vernis Blend Vario Wallbar Set 04970 0 Serie:

Publicidad

English
Technical Information
Flow rate
04969xx0
04970xx0
04971xx0
Installation Considerations
• For best results, Hansgrohe recommends that this
unit be installed by a licensed, professional plumber.
• Please read over these instructions thoroughly
before beginning installation. Make sure that you
have all tools and supplies needed to complete the
installation.
• To prevent scald injury, the maximum output
temperature of the shower mixing valve (not
included) must be no higher than 120°F (49°C).
In Massachusetts, the maximum output temperature
can be no higher than 112°F (44°C).
• 04969xx0 only: This showerhead is for use with
automatic compensating valves rated at 1.9 GPM
(7.2 L/min) or less.
• 04970xx0 only: This showerhead is for use with
automatic compensating valves rated at 1.3 GPM
(4.9 L/min) or less.
• 04971xx0 only: This showerhead is for use with
automatic compensating valves rated at 1.1 GPM
(4.2 L/min) or less.
2
2.5 GPM (9.5 L/min)
1.75 GPM (6.6 L/min)
1.5 GPM (5.7 L/min)
• 04969xx0, 04970xx0, 04971xx0: The
screws and anchors included with this set are suitable
for use in a tile or other solid surface wall. They
are not suitable for use in an acrylic or fiberglass
shower enclosure. Please contact the manufacturer
of the enclosure regarding recommended mounting
locations, reinforcement requirements, and mounting
hardware.
The wallbar is not for use as a grab bar. If a
grab bar is required, install one separately.
• Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.

Publicidad

loading