Multimetrix DMM 210 Manual De Instrucciones página 32

Case Double molded, waterproof IP67
Shock (Drop Test) 2 m
Diode Test Test current of 0.9mA max.,
open circuit voltage 2.8V DC typical
Continuity Check Sound alerts stops if:
resistance > 100 Ω,
test current < 0.35mA
Input Impedance > 10MΩ V = and V ≈
AC Response Averaged
ACV Bandwidth 40Hz to 1kHz
Peak Factor ≤ 3 at full scale up to 500V, decreasing
linearly to ≤1.5 at 1000V
Display 6,000 count backlit LCD with bargraph
Overrange value "OL" is displayed
Auto Power Off 15 min. (approx.) with disable feature
Polarity Automatic, no indication for positive values;
minus (-) sign for negative values
Measurement Rate 2 measures per second, nominal
Low Battery Indication "
below operating voltage
Battery 9 V battery (6LF22)
Fuses mA, µA ranges: 0.8A/1000V ceramic fast
blow
A range: 10A/1000V ceramic fast blow
Operating Temperature 5ºC to 40ºC
Storage Temperature -20
Operating Humidity max 80% up to 31ºC decreasing linearly to
40ºC
Storage Humidity < 80%
Operating Altitude 2000 m max.
Weight 342 g incl. holster
Dimensions 187 x 81 x 50mm incl. holster
Safety In compliance with IEC61010-1
Installation category: III
Rated voltage: 1000 V
Pollution degree: 2
30
" is displayed if battery voltage drops
o o
C to 60 C
Chapter II
DMM210