BEARWARE 303717 Manual página 24

Status LED
5. Initial use
1. Take the product out of the package and remove all the packaging material.
Open the battery compartment of the outdoor sensor and insert two 1.5V
AA batteries. Pay attention to the correct polarity of the contacts.
2. Open the battery compartment on the weather station and insert three 1.5V
AAA batteries. Pay attention to the correct polarity of the contacts. Alter-
nately, connect the provided 5V DC coaxial power adapter to the weather
station.
3. Connect the power adapter to a properly installed socket.
Note: If the weather station is only used with 1.5V AAA batteries, the backlight is
not permanently switched on. Press the "ALARM/SNOOZE" button to briefly turn
on the backlight.
24
"Channel" switch
"RCC" button
"Reset" button
Battery com-
partment
English