Domo DO1006S Manual De Instrucciones página 26

PARTS
1. Filter dust reservoir
2. Dust reservoir
3. Button to empty the dust reservoir
4. Floor nozzle
5. Button to extend/retract brushes
6. Telescopic tube
7. Sliding button for tube length
8. Handle for hose with valve
9. Flexible hose
10. Connector for the hose
11. Handle
12. On/off button
13. Button for cord roll-up system.
14. Air exhaust
15. Button to empty the dust reservoir
16. Crevice vacuum cleaner
17. Furniture nozzle
18. Duster
19. Hard floor brush
3
ASSEMBLY
Always unplug the appliance from the socket before removing or connecting parts. Make sure that the
dust reservoir is always in the correct position.
FLEXIBLE HOSE
· Assembly: Push the coupling of the flexible hose into the connector hole until you
hear it click.
· Disassembly: to unlock, press the unlock buttons on the sides of the connector.
TELESCOPIC TUBE
1. Put the handle of the hose into the telescopic tube.
2. Set the telescopic tube to the desired length. To do this, push the slide button forward and pull out
the bottom part of the tube to make it longer. Release the slide button and let the tube snap into
place.
26
DO1006S
13
1
2
9
11
10
15
12
16
14
8
6
7
5
4
19
17
18