Publicidad
Idiomas disponibles
Idiomas disponibles
1.
To do this, completely remove the dust reservoir by unscrewing the handle counter-clockwise. Keep
an eye on the slots of the dust reservoir.
2.
Then open the bottom of the filter system. The round filter is now visible.
3.
Take it out of the appliance so that the cyclones are visible. Clean the plastic filter, both the top and
the bottom of the plastic filter, so that all of the holes are dust-free. If you do this with water, make
sure that the plastic filter is completely dry before using it again.
THE FILTERS
The appliance has 3 filters. In a normal cleaning session, it is sufficient to tap out the filters. It is
recommended that you thoroughly clean the filters under tepid running water 3 to 4 times per year.
Make sure that it is completely dry before putting it back in the appliance. You can also replace them if
necessary. Avoid direct sunlight or intense overheating. Never put the filters in the washing appliance to
prevent deformation. Do not use abrasive or cleaning products and wash from the bottom of the filter.
1.
The round filter is located above the dust reservoir.
2.
When you take the dust reservoir out of the appliance, you will see the filter at the air intake of the
appliance. Always make sure that it is free of dust and dirt.
3.
On the back of the appliance there is a grille for the hepa filter. This can be easily removed by
pushing the clip of the grille to the right, and taking the grill out of the appliance. Take the hepa filter
out of the appliance by pushing the clip to the left.
3
PLEASE NOTE:
·
Make sure that all components are correctly assembled before using the vacuum cleaner again.
·
Always use the vacuum cleaner with the filters intact. If you do not do this, you may lose suction force
or damage the motor.
·
Unplug the plug before cleaning the filters.
·
Do not put the filter into the dishwasher.
·
Do not use a hairdryer to dry the filters.
28
DO1006S
2
3
1
3
3
2
3
Publicidad
