EGO POWER+ LM2150SP-FC Manual De Operaciones página 42

INSTALLING THE BLADE
NOTICE:
To re-install or replace the blade(s), be sure to replace the parts in the exact
order in which they were removed, especially ensuring that the words "THIS SIDE
FACING DECK" on upper blade is facing the mower deck and "THIS SIDE FACING
GRASS" on lower blade is facing you.
1. Wear protective gloves.
2. Insert the two saved "Blade Set"
bolts that removed during blade
removing into the sharpened or
new upper blade from the side that
stating" THIS SIDE FACING DECK"
and then mount the upper blade
onto the motor shaft (Fig. 27).
NOTICE: The diamond protrusion on the
"Blade Set" bolts should be aligned with
the rhombic hole in the upper blade
(Fig. 28).
3. Depending on the cut desired,
mount the lower blade chosen
onto the motor shaft. Fig. 29 is
illustrating EGO High-Lift Bagging
Lower Blade mounting.
42
56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC/LM2150SP/LM2150SP-FC
27
"Blade
Set" Bolts
Upper Blade
28
Diamond
Protrusion on
"Blade Set" Bolts
29
EGO High-Lift Bagging Lower Blade
Fan
Rhombic Hole in
Upper Blade
Upper Blade