EGO POWER+ LM2150SP-FC Manual De Operaciones página 43

4. Mount the washer and shaft bolt
and finger tighten the bolt (Fig. 30).
5. Mount the "Blade Set" nuts and
finger tighten them with the "Blade
Set" bolts behind (Fig. 31).
6. Insert a manual screwdriver or
metal rod 5/16" (8 mm) or less in
the stabilizer hole. This is to stop the
blade from rotating while tightening
the bolt/nuts (Fig. 32).
7. Use a torque wrench with 9/16"
(14mm) socket to tighten shaft bolt
in CLOCKWISE direction to 22 ft-lb
(30 N.m.) and alternate to 11/16"
(17mm) socket to tighten "Blade
Set" nuts in CLOCKWISE direction
to 36-43 ft-lb (50-60 N.m.).
56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC/LM2150SP/LM2150SP-FC
30
Washer
Shaft Bolt
31
"Blade Set" Nuts Finger Tightened
32
43