Publicidad
Idiomas disponibles
Idiomas disponibles
SET UP & USE
OPERATION INSTRUCTIONS
FILLING WITH WATER
1. Hold the iron upright so that the Water Filling Inlet is in
a horizontal position.
2. Fill with water through Water Filling Inlet until the water
reaches the "MAX" mark indicated on the side of the
iron. Never fill above this mark.
CHOICE OF WATER
This iron has an Anti-Calc Filter so it should be filled with regular
tap water. Do not use chemically descaled, distilled, demineralized water or any other liquids.
SETTING TEMPERATURE
To change temperature settings push the temperature button until you reach the
fabric you would like to select.
Follow the ironing instructions on the garment label. If there is no instruction but you
do know the kind of fabric, please consult the following table. ACRYLIC is the MIN or
lowest temperature and LINEN is the MAX or highest temperature.
NOTE: If the fabric consists of various kinds of fabrics, always select the temperature
required by the most delicate fabric.
STEAM IRONING
Place the iron in a vertical position. Insert the plug into the socket. The iron will
make a clicking sound and the control panel display will indicate READY. Push the
temperature control button until you reach the desired fabric setting on the control
panel display. The selected setting in the control panel display will blink until the
temperature has been reached and the iron is ready to use. During ironing, the
selected fabric will automatically blink and the power indicator light switches on
and off as the thermostat maintains the set temperature. You may continue ironing
during this process.
Page 6
PANTONE
Cool Grey 5C
READY
PANTONE
Cool Grey 11C
Publicidad
