Publicidad
Idiomas disponibles
Idiomas disponibles
SET UP & USE
The iron produces steam, when it is set at a high temperature (COTTON, JEANS,
LINEN). Turn the steam control slider to the required position. Steam is produced as
soon as the iron is held horizontally.
SPRAY
Press the spray button " " as often as required to spray
water on clothes.
NOTE: When using the water spray function, ensure that
there is enough water in the water tank. You may
have to pump the spray button several times to start
the spraying function.
BURST OR VERTICAL STEAM IRONING
Press the Burst of Steam button " " to generate a powerful burst of steam that
penetrates fabrics and smooths tough creases. Wait a few seconds before pressing
again.
By pressing the Burst of Steam button " " at intervals, you can also iron vertically for
items such as curtains, hung garments, etc.
NOTE: The burst of steam function can only be used at high temperatures (COTTON,
JEANS, LINEN) when the indicator light turns "Off".
DRY IRONING
For ironing without steam, follow the instructions in "steam ironing" section except
the Steam Control slider should remain in " " position (no steam).
ANTI-CALC SYSTEM
A filter inside the water tank softens the water and prevents scale build-up in the
soleplate. The filter is permanent and does not need replacing.
NOTE: Use tap water only. Do not use chemically descaled, distilled, demineralized
water or any other liquids.
ANTI-DRIP SYSTEM
The iron automatically stops steaming when the temperature is too low to prevent
water from dripping out of the soleplate.
With the anti-drip system, you can perfectly iron even the most delicate fabrics.
Page 7
Publicidad
