Publicidad
Idiomas disponibles
Idiomas disponibles
5-Delay
This function is used for delaying clothes drying time within 24 hours. The
delay time means the program will start after x hours. When the delay program
starts, the time starts to countdown on the display and the delay icon blinks.
6-Time adjust
These buttons are effective only for Manual cycles. Press these buttons to
change the drying time you prefer. Push repeatedly to get your desired drying
time, including 120 minutes,90 minutes, 60 minutes, 30 minutes.
7-Dryness
Press the button to select the dry level, including More, Normal, Less, Damp.
Different dry level will result in different drying time. For clothes to be ironed
manually, a lower dry level should be selected.
Press and hold for 3 seconds to remember your favorite drying cycle, this cycle
will be "My Cycle".
8-Signal
Press once to stop the buzzer sound. Press again to activate the sound. Your
selection will be kept until next pressing.
9-Damp alert
This function is useful when you want to take some garments out for ironing.
The unit will beep 10s when the moisture in the clothes is good for ironing. At
this time, you can take those garments out and continue drying the other by
pressing the "START/ PAUSE" button once.
Note: The unit will not stop operating if you don't take those garments out for
ironing.
10-Child lock
Press the " " and "Wrinkle care" together to activate the control lock function.
Press again for another 3 seconds to deactivate the function. All buttons
except the "Power" will be out of function when control lock activated.
Symbols
Delay start
Child lock
Clean filter
Water tank full
(you should
empty water
tank)
20
Wrinkle care
My Cycle
Buzzer sound open
Damp alert open
Cycle phase status
Means machine was
drying with heating air
Means machine was
working with cooling air
Means it is time to open
the door
Means machine was
making wrinkle care
Publicidad
