Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTION
Child lock
This function is useful to prevent children from playing with the unit.
P-ress and hold the " "and "Wrinkle care" buttons simultaneously for 3
seconds to activate this function. The blue "Child lock" light will turn ON.
P-ress and hold the " " and "Wrinkle care" buttons simultaneously again for
3 seconds to deactivate this function. The "Child lock" light will turn OFF.
- When this function is activated, all functions will be out of function except the
POWER button and DEACTIVATE function above.
- You can Power ON your unit and set this function then Power OFF. When you
do so, even if the unit is powered on, you still cannot start it before the Control
Lock function is deactivated.
- This function will be cancelled automatically if your unit is out of power, such
as unplug the unit, power supply out of service, etc.
Empty the water tank
1. Pull out and hold the water tank with
two hands.
2. Transfer the water tank flatly in case
of water overflow.
3. Tilt the water tank, pour out the
condensate water into the basin.
4. Install the water tank.
•
WARNING
•
Do not use the dryer without the water tank.
Filter clean
Lint filter
24
Empty the water tank after each use. Otherwise, the
programme will be paused and the "A" icon will light. After
the tank is emptied, the dryer can be restarted by pressing
【Start/Pause】 button.
Do not drink the condensate water.
To prevent a risk of fire, make sure to clean the
lint filter before or after every load;
-
CAUTION
-
-
-
To shorten drying time.
To operate more energy efficiently.
Do not operate your dryer without the lint filter
in place. Doing so will damage your dryer.
Do not use a damage or broken lint filter. This
may reduce performance and/or cause fire.
Publicidad
