Publicidad
Idiomas disponibles
Idiomas disponibles
Making a coffee or a drink
• Use capsules specific for this machine.
• For the preparation of a good espresso or drink, on the
first daily use of the machine remember to preheat the
cup using the cup warmer (20) or water from the machine
without capsule.
This will ensure the correct drink delivery temperature.
(Fig.7)
• Place the cup under the delivery nozzle.
• Fully lift the control lever (1) (Fig. 8) and insert a capsule
into the space provided. (Fig. 9)
WARNING:
Before inserting the capsule, slowly and fully lift the control
lever (1) on the top of the machine in order to eject the spent cartridge.
For hygienic reasons and to preserve the high quality of the
product, it is advisable to eject the capsule immediately after
the delivery of the drink.
• Fully close the lever (1), press a delivery symbol (2-3) according to your taste, and press it again
to stop the delivery when the desired amount of coffee or drink has been reached (Fig. 10).
In the event of closing difficulties, fully open the lever and then close it again.
• To extract the capsule, slowly lift the lever (1). If the capsule is not ejected, repeat the operation
or press the delivery symbol (2-3) while simultaneously lifting the lever (1).
WARNING:
•After delivering 10 coffees or drinks in one go, wait at least 2 minutes before delivering more.
•The machine is designed for single deliveries of up to 75 seconds.
1
Fig. 8
Fig. 9
1
Fig. 10
26
20
2
3
Fig. 7
Publicidad
