Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning the hot water nozzle
If the delivery of steam from the nozzle (22) appears poor,
cleaning is required. Proceed as follows:
• Pull out the central drawer
• Use a pin to clean the left nozzle hole
• Thoroughly clean the nozzle surface of any scale or dirt
• Replace the central drawer (Fig. 21)
Cleaning the milk/steam nozzle
• Pull out the central drawer.
• Turn the milk/steam nozzle (23) anti-clockwise and remove
it. Turn it upside down and wash it under running water
until clean (Fig. 22).
• For better cleaning and operation, remove the milk/steam nozzle (23), separate the different
components and wash them under running water (Fig. 23).
After washing all the components separately, reassemble them and check the seals of the red
O-Rings at the joints. Replace the nozzle on the machine by turning it clockwise.
23
Fig. 22
STORAGE
If the machine is not used for a long period of time, disconnect the power plug and empty the tank.
Store the machine in a dry place, protected from dust and keep away from the reach of children.
We recommend storing the machine in its original packaging.
Store the machine at a temperature no lower than 5° C, to prevent residual water left inside from
freezing and damaging the machine.
Fig. 23
30
22
Fig. 21
Publicidad
