After making a coffee or a drink
After making a coffee or a drink, the capsule is removed as
follows:
•Lift the control lever backwards (the capsule falls into the
appropriate container).
CAUTION: for hygienic reasons, we recommend that
the capsule is removed as soon as used.
Empty the container regularly.
• To make another coffee or drink, insert a new capsule and
repeat the process, otherwise close the lever again.
• To prepare a drink different from the previous one, to avoid
altering the taste, after ejecting the used capsule allow the
delivery of some clear water to eliminate any residues.
Emptying the capsule tray
After 15 coffees have been delivered, the full drawer indicator
light (16) comes on. This means that further coffee can only
be delivered after emptying the capsule tray. To do this, remove
and empty the tray (6).
Remove the drip grid (5) (Fig. 19), wash and dry the
components, then reassemble the tray (6) and replace it in its
position (Fig. 20)
NOTE: Wait at least 5 seconds before replacing the tray
(6). If the tray is replaced and the light (16) on the control
panel stays on, remove the tray again, wait at least 5 seconds
and put it back.
Fig. 19
Fig. 20
29
6
6