BaByliss 9000 Manual De Instrucciones página 8

HOW TO USE YOUR BABYLISS 9000
INSTRUCTIONS FOR USE
Please make sure Whilst still
you touch and touching the rose
hold the rose gold panel with
gold panel. one hand, use
your other hand
to press and hold
the on button for
2 seconds.
• Once the styler is switched on it will
automatically start heating up to160°C.
• There are 3 temperature settings 160°C,
170°C and 180°C which are indicated by
the LEDs as shown below.
• To select the temperature setting press
the on/off button once, twice or three
times.
Temperature select
High (180
Medium (170
Low (160
Default temperature : 160
• The LEDs will flash when your styler is
heating up and will stop flashing once the
target temperature is reached and it is
ready to use
• If you have delicate, fine, bleached or
coloured hair, use the lower heat setting.
For thicker hair, use the higher heat set-
ting. We suggest when using for the first
time you test the heat settings to ensure
you've got the correct temperature
for your hair type. Start on the lowest
setting and increase the temperature as
necessary.
• Ensure your hair is dry and combed
through.
The gentle sound
• Divide hair into sections.
notification
indicates your
• Please note: Before styling make sure the
styler is switched
universal heat glove is worn on the hand
on.
which is guiding the hair around the barrel.
• Take a section of hair and place the styler
barrel under the hair section close to the
scalp, hold for a few seconds to boost
volume at the roots.
• Glide the hot brush through the hair
section and start to rotate the brush
away from your head
• As you reach the ends of the hair section,
continue rotating the brush to roll the
ends under.
• Repeat as necessary.
• Allow hair to cool before combing
o
C)
through.
o
C)
o
C)
• To switch off your styler please press and
o
C
hold the on/off button for 2 seconds.
The gentle notification sound indicates
the styler has switched off.
• Allow to cool before storing away.