Publicidad
Idiomas disponibles
Idiomas disponibles
15. ANNEX I: LED INDICATIONS AND
OPERATION OF THE SLC ENERGY
MANAGER DEVICE.
The display LEDs appear in 3 different statuses: off, flashing or on:
LED off
LED flashing
LED on
Depending on the combination of LEDs, the inverter will indicate
different statuses:
LED
Indicator
Status
Power supply
RS-485
communication
Serial
with the
Bus
EQUINOX2 solar
inverter
Internet
Internet status
Tab. 8. LED indicator lights.
USER MANUAL
LED status
Device without power
Device powered correctly.
Communication with the EQUINOX2 solar inverter not
established. Make sure that the Modbus address has been
entered correctly in the solar inverter and within the specified
range. See section ., step 2.
Establishing communication with the EQUINOX2 solar inverter.
The device is in scan mode.
Communication with the EQUINOX2 solar inverter established.
The device is not configured for Internet communication.
The device is being configured.
The device has Internet communication configured and
working.
Description
97
SLC ENERGY MANAGER ENERGY METER
Publicidad
