The easiest way is always to start from the highest
possible switch value and to add the smaller
values. The 10th DIP switch serves for the master/
slave switching and must not be set to ON during
the DMX control.
As an adjusting help a small Windows pro-
gramme can be downloaded via the internet:
www.imgstageline.com, support, software.
6.4 Focus setting
For focus setting turn out or turn in the lens ring (3).
The setting of the sharpness depends on the distance
of the unit to the area of projection.
7 Cleaning of the Optical System
The lenses should be cleaned at regular intervals,
depending on impurities caused by dust, smoke, or
other particles. Only then the light can be radiated in
maximum brightness. Prior to opening the unit dis-
connect the plug from the mains socket and let the unit
cool down for 15 minutes.
For cleaning use a soft, clean cloth and a commer-
cial detergent for glass. Then carefully wipe the parts
dry.
All rights reserved by MONACOR
be reproduced in any form or by any means for any commercial use.
8 Specifications
Power supply: . . . . . . . . . . . 230 V~/50 Hz
Power consumption: . . . . . . 200 VA
Lamp: . . . . . . . . . . . . . . . . . . reflector halogen lamp
Ambient temperature: . . . . . 0 – 40 °C
Dimensions: . . . . . . . . . . . . . 265 x 140 x 160 mm
Weight: . . . . . . . . . . . . . . . . . 5 kg
DMX channels: . . . . . . . . . . 1
DMX address range: . . . . . . 1 – 511
8.1 DMX values of the functions
DMX value Colour/function
112 – 127 orange
128 – 143 light-green
144 – 159 light-blue
160 – 175 magenta
176 – 191 pink
192 – 223 continuous change of colours (rainbow
224 – 255 strobe effect from slow to fast
According to the manufacturer.
Subject to technical modification.
®
INTERNATIONAL GmbH & Co. KG. No part of this instruction manual may
0 – 15 no light (Blackout), lamp is switched off
after a few seconds
16 – 31 white
32 – 47 red
48 – 63 yellow
64 – 79 blue
80 – 95 green
96 – 111 amber
effect) from slow to fast
15 V/150 W,
type MR 16 with
base GZ 6,35
GB
11