Publicidad
Idiomas disponibles
Idiomas disponibles
How to Chop
NOTE: Make sure the unit is turned OFF and
unplugged before use. Never use hand to
push food into processor. Do not use the
processor continuously for more than 3
minutes at a time.
1 Lock the bowl onto base.
(See "How to assemble the bowl")
2 Grasp the chopping blade by its stem and
slide it onto the center post. (Figure 3).
3 Place food into bowl.
4 Lock the cover with continuous fl ow chute
onto bowl. (See "How to Lock the Cover")
NOTE: Make sure the Flow Insert is pushed
down so food will remain in the bowl. (See
Figure 4).
5 Plug the cord into an electrical outlet.
6 Turn the knob to the ON position for
continuous processing or the PULSE
position for short processing tasks. When
using the PULSE setting, hold the knob in
the PULSE position for about 2–3 seconds
at a time, check results and repeat if
desired.
7 When fi nished processing, release the
knob, or if you were using Continuous
ON, turn the knob to the OFF position
and allow the chopping blade to stop
rotating.
8 Twist the cover counter-clockwise to
remove.
9 Hold the Chopping Blade by its stem and
remove. Unlock the bowl by turning it
counter- clockwise and lifting off . Empty
the processed food.
NOTE: Chopping Blade is very sharp, use
caution when handling.
www.oster.com
Figure 3
Figure 4
7
Publicidad
