Symbols; Intended Use; Parts Of The Machine; Operation - Festool SCA 8 Manual De Instrucciones

Charger
Permitted charging temperature range
Temperature monitoring
Safety class
3

Symbols

Warning of general danger
Warning of electric shock
Read the operating manual and safety
instructions.
Read the operating instructions and
safety instructions.
For internal use only
Fuse with current
T
Safety transformers
Safety class II
Do not dispose of it with domestic
waste.
4

Intended use

Chargers suitable
– for charging the Festool lithium-ion battery
packs: BP, BPS and BPC in the following
voltage and current classes:
10.8 V (3S1P)
10.8 V (3S2P)
14.4 V (4S1P)
14.4 V (4S2P) 2.6 Ah, 3.0 Ah, 4.2 Ah, 5.2 Ah*
18.0 V (5S1P) 1.3 Ah, 1.5 Ah, 2.6 Ah, 3.1 Ah*
18.0 V (5S2P) 2.6 Ah, 3.0 Ah, 4.2 Ah, 5.2 Ah*,
– For internal use only.
* Rapid charging battery packs
The user is liable for improper or non-in­
tended use.
5
[1-1] Charging station
[1-2] Battery pack
[1-3] Remaining charge time display (SCA 8
[1-4] Charge status display
[1-5] Cable holder
[1-6] Vents (SCA 8 only)
[2]
The specified illustrations appear at the begin­
ning of the Operating Instructions.
6
6.1
Unauthorised voltage or frequency.
Risk of accidents
► The mains voltage and the frequency of the
► In North America, only Festool machines
1.3 Ah, 1.5 Ah
Start charging
2.6 Ah, 3.0 Ah
1.3 Ah, 1.5 Ah
unwound from the recess [1-5].
► Insert the charger's mains plug in the sock­
► Push the battery pack [1-2] into the charg­
6.2 Ah*
Wall mounting
See figure [2]
6.2
After inserting the charger in the socket, all the
LEDs light up for approx. 1 s (SCA 8 only).
After this, the charge status display [1-4] on the
charger initially changes to the yellow LED
TCL 6
-5 °C to +55 °C
via NTC resistor
/II

Parts of the machine

only)
Wall mount for charger

Operation

Commissioning
WARNING
power source must correspond to the
specifications on the machine's name
plate.
with the voltage specifications 120 V/60 Hz
must be used.
Before use, the cable must be completely
et.
ing station[1-1].
Meaning of the LEDs
English
SCA 8
-5 °C to +55 °C
via NTC resistor
/II
9