Publicidad
Idiomas disponibles
Idiomas disponibles
02 PREPARATION
USE OF EACH FUNCTION BUTTON
After plugging in the power supply, the power-on sound "Bi~Bi~" will be emitted and enter the standby state and all
function indicators will not light up. Except for the Power Button
5 Timer (-) Button
1) In the power-on state, press the Timer Button
2) In the standby state, when the presetting function has been turned on, press the
6 Auto Mode Button
1) In the power-on state, press the
2) The product automatically adjusts the airflow speed (Levels 1, 2, and 3) for efficient
3) The air quality sensor will automatically adjust the fan speed along with the color indicator
7 Light On/Off Button
Press the
12
range is 0-24 hours, displayed on display panel . (00 means no timer set) In the power-on
state, press the
button, LED flashes and displays the current set timer, and the LED
"h" lights up, which is the timer setting state; press the
time is reduced by 1 hour, the timer indicator lights up and the display panel displays the
corresponding digits. Press and hold the
rapidly and the display changes accordingly.
button to adjust the schedule time down, and the adjustment will not cycle. When it is
adjusted to "00", the timer function will be canceled. During the setting process, LED flashes
to display the currently set time; wait for 3 seconds to set the schedule time successfully.
the LED "AUTO" lights up when it is turned on.
operation depending on the indoor air quality detected by the sensor. The product requires
60 seconds to calibrate the sensors. The mode is intended for general users' convenience.
on the control panel.
Green - healthy
Yellow - moderate
Red - unhealthy
button to turn on/off the LED on the display panel.
and the Timer Button, other buttons are invalid.
to reset the schedule function. The timer
button again, the set working
for more than 2 seconds to reduce the time
button to turn on or off the auto mode function, and
Publicidad
