Publicidad
Idiomas disponibles
Idiomas disponibles
[Auto Mix]
Menu Item
Description
[Auto Mix]
Select whether to perform mixing the sound output from
[On] [Off]
WebLink and AV source sound automatically.
[Input/Output settings]
Menu Item
Description
[USB MTP]
Select whether or not to activate USB MTP (Media Transfer
[Off] [On]
Protocol) connection.
[WebLink Sound]
Set where the sound for WebLink is output when it is used
with a smartphone.
NOTE
The sound may not be output from this unit when using WebLink
with certain smartphone models. In this case, select [Smartphone].
[AVH]
The sound is output from the speakers of this unit.
[Smartphone]
The sound is output from the speakers of the smartphone.
NOTE
With an iPhone, the sound is always output from the speakers of
this unit.
[AV Input]
Select AV input source (page 34).
[Source] [Camera] [Off]
[AUX Input]
Set to [On] for AUX source (page 33).
[On] [Off]
[Camera settings]
A separately sold rear view camera (e.g. ND-BC8) is required for utilising the rear view
camera function. (For details, consult your dealer.)
▶Rear view camera
This product features a function that automatically switches to the full-screen image of
the rear view camera installed on your vehicle when the gearstick is in the REVERSE (R)
position.
▶Camera for Camera View mode
Camera View can be displayed at all times. Note that with this setting, the camera image
is not resized to fit, and that a portion of what is seen by the camera is not viewable.
To display the camera image, touch [Camera View] on the AV source selection screen
(page 15).
NOTES
• To set the rear view camera as the camera for Camera View mode, set [Back Camera Input] to [On]
(page 35).
• When using the 2nd camera, set [AV Input] to [Camera] (page 34).
• When the camera view of both the rear view camera and 2nd camera are available, the key to switch
the display appears. Touch this key to switch the display between the rear view image and 2nd
camera image.
CAUTION
Pioneer recommends the use of a camera which outputs mirror reversed images, otherwise the screen
image may appear reversed.
• Immediately verify whether the display changes to the rear view camera image when the gearstick is
moved to REVERSE (R) from another position.
• When the screen changes to full-screen rear view camera image during normal driving, switch to the
opposite setting in [Camera Polarity].
• If you touch
while the camera image is displayed, the displayed image turns off temporarily.
Menu Item
Description
[Back Camera Input]
Setting rear view camera activation.
[Off] [On]
[Camera Polarity]
Setting the polarity of the rear view camera.
[Battery]
The polarity of the connected lead is positive.
[Ground]
The polarity of the connected lead is negative.
NOTE
This function is available when [Back Camera Input] is set to [On].
[Parking Assist Guide]
You can set whether to display the parking assist
[On] [Off]
guidelines on the rear view camera images when backing
up your vehicle.
35
En
Publicidad
