Descargar Imprimir esta página

Gude SG 131 A-SYN Traducción Del Manual Original página 35

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 58
Gauntlets made rom a suitable material (leather)
must be worn on both hands. These must not be
damaged.
Suitable aprons must be worn to protect the clothing
against ying sparks and burns. I the nature o the
work, e.g. overhead welding, requires this, a protec
tive suit must worn and, where necessary, this must
also include suitable head protection.
The protective clothing which is used, as well as all
the accessories, must be compliant with the "Personal
Protective Equipment" Regulation (2016/425).
Class A (IEC 60974-10):
I you intend to use the apparatus in residential sur
roundings supplied by the low voltage mains supply,
an electromagnetic lter may be required to suppress
electrical disturbance to a level where they will no
longer be a nuisance to the user.
The apparatus may be used in industrial or other
areas where power is not supplied by municipal LV
mains.
Class A apparatus are not intended or use in resi
dential areas where power is supplied via municipal
LV mains, since unavourable power conditions may
cause intererence.
As a user, you must make sure, ater consultation with
your energy provider, i necessary, that your point o
connection on which the machine is to be operated
meets the requirements above.
The user is responsible or aults arising rom the
welding.
SYMBOLS
Read the operating instructions to reduce
the risk o injury.
Ground beore use
Warning / Caution!
Warning against dangerous voltage
Use a welding mask!
Special welding gloves to be worn at all
times.
Wear saety cut through resistant shoes
with saety sole and steel toe !
Protective apron to be used
Unplug the machine beore any work
on it.
The appliance must be stored in a dry place and
protected rom rost.
Keep the machine out o reach o children.
Keep dry at all times. Never expose tool
to rain.
~
~
Singlephase transormer
1
1
Singlephase alternating current with
rated requency o 50 ~ 60 Hz
V
Voltage
AC Current
No gas
Wire eeder
Fan
Suitable or welding with an increased
electric risk.
Any damaged or disposed electric or
electronic devices must be delivered to
appropriate collection centres.
CE marking
ENGLISH
29

Publicidad

loading

Este manual también es adecuado para:

20079