Descargar Imprimir esta página

AL-KO 5351VS-B Instrucciones De Uso página 25

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 52
Starting manually
without remote throttle control
1. Pull in the safety brake handle on the handlebar and
hold it (
10) – the brake handle does not lock.
2. Pull out the starter cord sharply, then allow it to
slowly rewind (
11).
with remote throttle control
1. Set the throttle lever to position max (
2. Pull in the safety brake handle on the handlebar and
hold it (
10) - the brake handle does not lock.
3. Pull out the starter cord sharply, then allow it to
slowly rewind (
11).
4. When the motor has warmed up (about 15–20
seconds), set the throttle lever to a position
between min and max.
Electrostart without primer/choke
1. Pull in the safety brake handle on the handlebar and
hold it (
10) – the brake handle does not lock.
2. Turn the ignition key fully to the right in the ignition
lock (
12).
3. As soon as the motor starts running, release the
ignition key (it returns automatically to position "0").
Blade coupling (optional)
With the blade coupling, the mower blade can be
engaged or disengaged while the motor is running.
Engaging the blade coupling
1. Pull in the safety brake handle on the handlebar
and hold it (
10) - The brake handle does not
lock.
2. Push the coupling lever away from you (
- The blade coupling is engaged.
Disengaging the blade coupling.
1. Release the safety brake handle (
- The blade coupling is disengaged.
- The coupling lever moves to rest position (
455999_d
Turn the motor off
Lawnmower without blade coupling
1. Release the safety brake handle (
10/1).
Lawnmower with blade coupling
1. Release the safety brake handle (
2. Set the throttle lever to position min (
Wheel drive (optional)
Switching on the wheel drive
1. Press the transmission control handle against the
Switching off the wheel drive
1. Release the transmission control handle (
9/1)
16).
9/2).
- The motor is switched off.
Caution - danger of serious cut injuries!
The motor may continue running. After switching
off, make sure the motor has stopped turning.
Warning!
Remove the ignition key!
- The motor is switched off.
Caution - danger of serious cut injuries!
The motor may continue running. After switching
off, make sure the motor has stopped turning.
(
Caution!
Engage the transmission only when the motor is
running.
handlebar and hold it (
control handle does not lock.
- The wheel drive is switched on.
- The wheel drive is switched off.
GB
16).
16).
10/2).
14)
13) – the transmission
15).
23

Publicidad

loading

Este manual también es adecuado para:

127631