Publicidad
Idiomas disponibles
Idiomas disponibles
Unsuitable cookware
o vessels with round bottom;
o ceramic, glass;
o aluminium, bronze or copper
unless, it is expressly marked as
suitable for induction;
o pots/pans with a diameterof less
than 12 cm;
o cookware with feet.
CAUTION!
Please use only the cookware marked suitable for induction cooker.
If the induction hotplate detects too great a separation from the magnetizing
container, it will cause a reduction in power. This may cause the overheating
prevention device to malfunction. For this reason, do not use aluminum, bronze
or non-metallic containers.
6.3 Operation instructions
•
Before the device operation clean it according to the instructions in section
7.2 "Cleaning".
CAUTION!
Do not place empty dishes on the cooking surface.
Heating of empty pot or frying pan will activate the overheating protection,
acoustic signal, and deactivate the device.
The digital display will show the error message "E2".
In such case remove the pot from the cooking surface and leave the device to
cool down. Then it may be used again.
•
Connect the device to appropriate single socket. The acoustic signal will
be emitted and ON indicator will flash.
The device is in the standby mode.
•
Place appropriate cooking dish with food centrally on the cooking field.
•
Press ON/OFF switch
will illuminate.
- 32 -
to turn the cooker on. ON and power level (
) indicator
Publicidad
