Publicidad
Idiomas disponibles
Idiomas disponibles
CAUTION!
To avoid injuries of the operators or the device damage do not connect
the cooker to the power supply without the dust and grease filter.
o Always use the soft cloth only, never use any abrasive cleaning agents which may
scratch the device.
o The ventilation slots in the back of the device must be always free from dirt and
dust, clean them as required (e.g. with use of paint brush or blower).
o Never clean the device with use of gasoline-based agents or solvents in order
to avoid the surface damages.
o After cleaning dry and polish the surface with dry cloth.
8. Possible Malfunctions
Error
message
• No dish on the cooking field
E0
or the dish is inappropriate.
• Excessive rise of the device
temperature (e.g. due to
covered ventilation slots).
E1
• Damaged part (e.g.
transistor).
• The overheating protection
has been activated.
E2
• Short overvoltage.
E3
Cause
Solution
• Place the appropriate dish on
the cooking field.
• Clean the ventilation slots.
Leave the device to cool down for
a few minutes and use it again.
If the message is displayed again
contact the vendor.
• Contact the vendor.
• Remove the dish from the cooking
field. Let the device cool down for a
few minutes. After cooling the
device is ready for further
operation.
• Disconnect the device from the
power supply (pull the plug!).
Leave the device to cool down for
a few minutes and use it again.
- 35 -
Publicidad
