Publicidad
Idiomas disponibles
Idiomas disponibles
Settings
Power levels
The display will show the initial power level 5.
Use the selection buttons
digital display shows the selected power level.
Temperature levels
° C
It is possible to leave the power level mode and switch to the temperature
level mode by pressing the mode selection button.
The device will be switched to the initially set temperature of 120 ° C .
Use the selection buttons
of 60° C – 240° C.
(Temperature levels: 60, 80, 100, 120, 140, 160, 180, 200, 220, and 240°C).
The digital display will show the selected temperature and temperature indicator
( ° C ).
Time
After selecting the operation mode (power or temperature) press the button
The display will show digit "0" and the LED time indicator will illuminate (
Use the buttons
30 minutes and in 10-minute intervals up to 180 minutes.
Time is counted down in one minute steps and the digital display returns to
the previous indication (
After that time the device turns off automatically. Only the fan operates for
approx. 1 minute to cool down the electronic components and turns off.
NOTE!
It is possible to change the setting at any moment during operation with use
of buttons
level setting unchanged.
It is also possible to switch to the power or temperature mode without
changing the time setting.
The device will be then operating according to the data entered as the last.
or
or
or
to select appropriate time in one minute intervals up to
, ° C ).
.
or
The device memory keeps the power or temperature
to change that setting in range of
to change the temperature setting in range
. The
.
MIN).
- 33 -
Publicidad
