Publicidad
Idiomas disponibles
Idiomas disponibles
Charging with the charging
stand (only for ES-SL83)
1. Insert the appliance
plug into the charging
stand.
2. Place the shaver on
the charging stand.
3. Plug in the adaptor into
a household outlet.
While charging
Charging in progress
The low battery/charge status
lamp stays in red.
Charging complete
The low battery/charge status
lamp turns off.
Charging abnormal
The low battery/charge status
lamp keeps blinking in red
quickly, twice a second.
PB013383 - ES-SL83_
(01EN)_05-19-16.indd 11
3
2
1
Using the shaver
Start shaving by applying gentle pressure to your face. Stretch
your skin with your free hand and move the shaver back and
forth in the direction of your beard. You may gently increase
the amount of pressure as your skin becomes accustomed to
this shaver. Applying excessive pressure does not provide a
closer shave.
Notes
After charging is completed, if the power switch is turned on
while the shaver is being charged, the low battery/charge
status lamp lights on in red and then turns off after 5 seconds.
This means that the shaver has been fully charged.
Recommended ambient temperature for charging is
10-35 °C (50 °F - 95 °F). It may take longer to charge, or the
low battery/charge status lamp will blink in red quickly and
the battery may fail to charge properly in extremely high or
low temperatures.
When charging the shaver for the first time or when it has not
been in use for more then 6 months, the low battery/charge
status lamp (red) may not glow. It will eventually glow if kept
connected for several minutes.
1 Press the power
switch.
2 Hold the shaver as
illustrated above and
shave.
11
2016/5/27 14:53:48
Publicidad
