To remove light dirt
4. Slide the cleaning
shutter until it clicks.
5. Clean the outer foil
section with running
water.
6. Turn the shaver off.
Rinse with water and
shake up and down
several times to remove
the water.
Be careful not to hit the main body on the sink or any other
object while draining the water. Failure to do so may cause
malfunction.
PB013383 - ES-SL83_
(01EN)_05-19-16.indd 13
For heavy dirt
4. Turn the shaver off
after 10 - 20 seconds.
5. Remove the outer foil
section and turn the
shaver on.
6. Clean the shaver and
the outer foil section
with running water.
Rinse with water and
shake up and down
several times to remove
the water.
7. Wipe off any drops of water with
a dry cloth.
8. Dry the outer foil section and the
shaver completely in a shaded area.
9. Attach the outer foil section to the shaver.
Replacing the system outer foil and the inner
blades
system outer foil
inner blades
Removing the outer foil section
Press the foil frame release buttons
and lift the outer foil section upwards.
Attaching the outer foil section
After turning the water inlet surface to the
front, securely attach the outer foil section to
the shaver until it clicks.
8
once every year
once every two years
2
1
13
2016/5/27 14:53:54