Lenco SCD-651 Manual Del Usuario página 9

scanning.
Auto Scan
1. Turn on the unit in DAB mode.
2. Press and hold the PLAY/PAUSE button to start auto-scanning the available stations.
Manual Scan
1. Turn on the unit in DAB mode.
2. Press and hold the MENU/INFO button to access the menu control.
3. Press the PREVIOUS or NEXT button until "Manual tune" is displayed and then press the SELECT
button.
4. Press the PREVIOUS or NEXT button to select the desired channel (5A-13F) and the press the
SELECT button to confirm.
5. To select another channel (5A-13F), press the PREVIOUS or NEXT button and then press the
SELECT button to confirm.
6. To quit manual scan, press the MENU/INFO button.
Tuning
Press the PREVIOUS or NEXT button to display the information of the next station. Then press the
SELECT button to tune to this station in few seconds.
Storing DAB Presets
You can save up to 20 DAB stations.
1. Tune to the station you wish to store.
2. Press and hold the PRESET button to enter preset store operation.
3. Press the PREVIOUS or NEXT button to a preset number that you want to store.
4. Then press the SELECT button to save.
Recall DAB Presets
1. Press the PRESET button repeatedly to change to different preset channels.
2. Alternatively, you can press the PREVIOUS or NEXT button (or turn the tuning knob) and then
followed by pressing the SELECT button to tune to different preset channel
Displaying DAB Station Information
There are 9 types of information as listed below. To change the display information, press the
MENU/INFO button repeatedly.
1. Radio Text scrolling
Comprises music titles or program details provided by the broadcaster.
2. Signal Bar
Transmission signal level. The more the rectangles are filled, the stronger the signal is received. The
unfilled rectangle on the left hand side is a threshold level where the signal strength received should
exceed this threshold. To improve the reception adjust the antenna position.
3. Program Type (PTY)
9