Hunter Road Force Elite GSP9700 Serie Instrucciones Funcionamiento página 4

Third Party Testing Performed by - Technology International Limited, Notified Body No. 2863 / Tests durch Dritte durchgeführt von - Technology
International Limited, Benannte Stelle Nr. 2863 / Tests tiers effectués par - Technology International Limited, organisme notifié n° 2863 / Pruebas de
terceros realizadas por - Technology International Limited, organismo notificado n.º 2863 / Test di terze parti eseguiti da - Technology International
Limited, organismo notificato n. 2863 / Tredjepartstestning utförd av - Technology International Limited, anmält organ nr 2863 / Tredjepartstest udført
af - Technology International Limited, bemyndiget organ nr. 2863 / Tests door derden uitgevoerd door - Technology International Limited, aangemelde
instantie nr. 2863 / Testes de Terceiros Realizados por - Technology International Limited, Organismo Notificado Nº 2863 / Harmadik fél által végzett
tesztelés: Technology International Limited, Notified Body No. 2863 / Testiranje treće strane provodi - Technology International Limited, prijavljeno
tijelo br. 2863 / Testování třetí stranou provádí - Technology International Limited, Notifikovaná osoba č. 2863 / Testy strony trzeciej przeprowadzone
przez — Technology International Limited, jednostka notyfikowana nr 2863 / Kolmannen osapuolen testauksen suorittaa - Technology International
Limited, ilmoitettu laitos nro 2863 / Δοκιμές τρίτων που πραγματοποιήθηκαν από - Technology International Limited, Κοινοποιημένος Φορέας Αρ.
2863 / Тестване от трета страна, извършено от - Technology International Limited, нотифициран орган № 2863 / Kolmanda osapoole testimise
viis läbi – Technology International Limited, teavitatud asutus nr 2863 / Trečiosios šalies bandymus atliko – Technology International Limited,
notifikuotoji įstaiga Nr. 2863 / Trešās puses testēšanu veic - Technology International Limited, pilnvarotā iestāde Nr. 2863 / Testovanie treťou stranou
vykonávané spoločnosťou - Technology International Limited, notifikovaný orgán č. 2863 / Testiranje tretje osebe izvaja - Technology International
Limited, priglašeni organ št. 2863 / Testare terță parte efectuată de - Technology International Limited, organism notificat nr. 2863
Applicable Harmonized Standards / Anwendbare harmonisierte Normen / Normes harmonisées applicables / Normas armonizadas aplicables /
Standard armonizzati applicabili / Tillämpliga harmoniserade standarder / Gældende harmoniserede standarder / Toepasselijke geharmoniseerde
normen / Normas Harmonizadas Aplicáveis / Alkalmazandó harmonizált szabványok / Primjenjivi harmonizirani standardi / Použitelné harmonizované
normy / Obowiązujące normy zharmonizowane / Sovellettavat harmonisoidut standardit / Ισχύοντα Εναρμονισμένα Πρότυπα / Приложими
хармонизирани стандарти / Kohaldatavad harmoneeritud standardid / Taikomi darnieji standartai / Piemērojamie saskaņotie standarti / Použiteľné
harmonizované normy / Veljavni harmonizirani standardi / Standarde armonizate aplicabile : EN ISO 12100:2010, EN 61310-1:2008, EN 61310-2:2008,
EN 61310-3:2008, EN 60204-1:2006+A1:2009, EN 13857:2019, EN ISO 13854:2019, EN 14123-1:2015, EN 14120:2015, EN ISO 4414:2010, EN ISO 14118:2018,
EN 14119:2013, EN ISO 13732-1:2008, EN 60529:1991+AC:1993, EN 61000-6-2:2005, EN 61000-6-4:2007, EN 60825-1:2014, EN 50581:2012
Certificate Number / Zertifikatsnummer / Numéro de certificate / Número certificado / Numero di certificate / Certifikatnummer / Certifikatnummer
/ Certificaat nummer / Número do certificado / Bizonyítvány száma / Broj certifikata / Číslo certifikátu / Numer certyfikatu / Todistuksen numero /
Αριθμός πιστοποιητικού / Номер на сертификата / Sertifikaadi number / Sertifikato numeris / Sertifikāta numurs / Číslo certifikátu / Številka potrdila
/ Numarul certificatului: NB1918HUNI.AMS, TI(E) / MD(2)-183
Responsible for / Verantwortlich für / Responsable de / Responsable de / Responsabile di / Ansvarig för / Ansvarlig for / Verantwoordelijk voor /
Responsável por / Felelős valamiért / Odgovoran za / Zodpovědný za / Odpowiedzialny za / Vastuussa / Υπεύθυνος για / Отговорен за / Vastutav /
Atsakingas už / Atbildīgs par / Zodpovedný za / Odgovoren za / Răspunzător de : Marco Kempin, Hunter Deutschland GmbH, Benzstraße 36, 82178
Puchheim Germany
Title of signatory: Robert Bruce
Engineering Administrator
Signed for and on behalf of the manufacturer.
We herewith declare, HUNTER ENGINEERING COMPANY
11250 Hunter Drive
Bridgeton, Missouri 63044-2391 USA
that the following described equipment in our delivered version complies with the appropriate basic safety and health requirements based on its design and type,
as brought into circulation by us. In case of alteration of the equipment, not agreed upon by us, this declaration will lose its validity. This declaration is issued
under the sole responsibility of the manufacturer.
Description of the equipment part : Wheel Balancing Machines
Equipment type : DSP9200 Series / GSP9200 Series / GSP922xTOUCH Series (SWTxx Series) / GSP9600 Series / GSP9700 Series (RFTxx Series) /
RFExx Series / SmartWeight Pro (SWPxx Series) / HD Elite Series / SmartWeight Elite (SWExx Series) / SmartWeight HN Series
Serial Number : KBXXXX (First two digits represent month/year)
Applicable UK Regulations
The Electromagnetic Compatibility Regulations 2016 / S.I.2016:1091
;
The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 / S.I.2012:3032
;
Supply of Machinery (Safety) Regulations 2008 / S.I.2008:1597
;
Designated Standards: EN ISO 12100:2010, EN 61310-1:2008, EN 61310-2:2008, EN 61310-3:2008, EN 60204-1:2006+A1:2009, EN 13857:2019, EN ISO
13854:2019, EN 14123-1:2015, EN 14120:2015, EN ISO 4414:2010, EN ISO 14118:2018, EN 14119:2013, EN ISO 13732-1:2008, EN 60529:1991+AC:1993 EN
61000-6-2:2005, EN 61000-6-4:2007, EN 60825-1:2014, EN 50581:2012
Certificate No.: Not applicable
UK Authorized Representative:
Person Authorized to compile the technical file:
Title of signatory:
Archives
4
February 21, 2023
UK Declaration of Conformity UK Declaration of Conformity
(Manufacturer's Declaration) (Manufacturer's Declaration)
Authorized Representative Service, The Old Methodist Chapel, Great Hucklow, SK17 8RG, UK
Hunter Engineering Company
11250 Hunter Drive
Bridgeton, Missouri 63044-2391-USA
________________
Robert Bruce
Engineering Administrator
Signed for and on behalf of the manufacturer.
____________
Equipment.-No.
February 21, 2023
Ref. 5491-TE
Declaration of conformity_5491