Publicidad
Idiomas disponibles
Idiomas disponibles
4
Scan the printhead alignment page
1. After loading paper, wait for the alignment page to print.
2. When the Open Lid light
scanner glass, aligned to the indicated corner. Close the scanner lid.
Note: Make sure you scan the alignment page printed by the printer.
3. Press the blinking copy button to scan the page.
On the printer display, the icon "A" blinks during the scan and disappears when alignment is done.
Printer hardware setup is complete after printhead alignment is done.
5
Install the HP Smart software
1. Make sure the Wi-Fi light
connectivity section in this guide.
2. Install the HP Smart software from 123.hp.com on a computer or mobile device.
3. Open HP Smart. If prompted, create or sign in to an HP account.
4. On the Home screen, choose the option to add a printer, and follow the instructions to connect the printer to your
network (only 2.4 GHz Wi-Fi supported).
6
blinks, open the scanner lid and place the printed page face-down on the
on the printer control panel is blinking. If not, see the Help and tips for Wi-Fi and
Get help with setup
Find setup information and videos online.
hp.com/support/printer-setup
123.hp.com
Publicidad
