Watts LF909 Small Serie Manual De Instrucciones página 2

Kit Components
All kits include the activation module and power adapter to
enable the flood sensor. Retrofit kits also include the flood sen-
sor and related components. If any item is missing, speak with
your account representative.
A. Activation module with
an 8' conductor cable
and ground wire
C. Cellular Gateway
with mounting
tabs and screws
E. Included in retrofit kits:
• Sizes ½" to ¾" flood
sensor with captive screw
and deflector
• Sizes 1" to 1½" flood
sensor with 2 deflectors
(1" and 1¼" to 1½") and
2 mounting bolts
• Sizes 2" to 3" flood sensor
with deflector and 2 sets of
mounting bolts (larger bolts
for LF009 2½" to 3" only)
Requirements
• #2 Phillips screwdriver
• ⁄ " Allen wrench
3
16
• ½" Wrench
• Instrument with small tip to change DIP switch settings
• Wire stripper
• A suitable location within 8 feet of the flood sensor for
mounting the Cellular Gateway on a wall or structure,
plugging the power adapter into a GFI-protected electrical
outlet, and running a ground wire from the Cellular
Gateway to the ground point
• Cellular network connection
• Internet browser
The connection kits are suitable only for new or existing
installations of the specified valve assemblies.
B. Four deflectors
(For Series 009,
sizes ½" to 2")
D. 24V Power adapter
(requires a 120VAC, 60Hz,
GFI-protected electrical outlet)
Retrofit kit for sizes
2" to 3" (minus
Cellular Gateway)
2
NOTICE