Publicidad
Idiomas disponibles
Idiomas disponibles
Please note that the names given to the HDMI IN ARC port and the CEC
function may vary depending on the manufacturer of your television.
For more detailed information, refer to the corresponding user manual.
. Connecting an external device via Blue-
tooth®
In Bluetooth mode, you can receive wireless audio signals from an external Blue-
tooth-enabled audio output device. Make sure the two devices are not more than
metres apart.
Only one Bluetooth device can be connected to the soundbar at a time.
To pair a Bluetooth-enabled audio output device with the sound system
for the first time, proceed as follows:
Switch on the soundbar.
Press the SOURCE button on the soundbar
button on the remote control
The operating LED flashes blue.
Switch on the Bluetooth function on your audio output device and activate
search mode on it to pair the two devices.
For more information about the Bluetooth function of your audio out-
put device, please refer to the corresponding user manual.
The device name of the soundbar "MD " will be displayed in the device list on
your audio output device as soon as the signal is found.
Select the soundbar and pair the two devices. If you are prompted to enter a
password, enter "".
When the coupling of the devices is completed successfully, an acoustic signal is
emitted and the operating LED lights up permanently blue.
In Bluetooth mode, the soundbar attempts to automatically connect itself to the
last audio output device connected via Bluetooth.
To pair a different/new Bluetooth device with the soundbar, and to disconnect
an active Bluetooth connection, if applicable, press and hold the
ton on the remote control
The operating LED flashes blue quickly, the soundbar is now back in Bluetooth pair-
ing mode.
once to select Bluetooth as the audio source.
for approx. seconds.
several times or press the
DE
FR
NL
ES
IT
EN
/PAIR but-
Publicidad
