2. Ensure that the carry handle is in
the topmost position.
3. Place the safety belt into both light
blue belt guides.
4. Close the safety belt (refer to the
safety instructions by the airline).
5. Tighten the safety belt by pulling
the belt end.
4
!
The buckle of the safety belt must
under no circumstances lie within
the light blue belt guides.
5
Removal:
Open the safety belt of the passenger
seat (refer to the safety instructions
by the airline).
Now you can take the baby seat from
the passenger seat.
Handle Adjustment
see images
-
6
7
The handle of the infant carrier
module can be adjusted to 3
positions.
6
!
Position for car, hand or stroller
transportation.
9
4
5
6
1
2
3
To adjust the handle, squeeze the
handle buttons on both sides to
-1
release it
, and then rotate the
7
handle until it clicks into any of the 3
-2
positions.
7
Installation with base
see images
-
8
18
1. Unfold the load leg from storage
compartment.
8
2. Fit the ISOFIX guides with the
ISOFIX anchor points.
9
The ISOFIX guides can protect the
surface of the vehicle seat from
being torn. They can also guide the
ISOFIX connectors.
7
2
1
8
9
10