Makita DEADML810 Manual De Instrucciones página 8

Changing brightness
Press the brightness change button while the appliance is
operating. The brightness decreases every time you press
the brightness change button. The brightness will return to
the highest when operating in the lowest brightness.
1
► 1. Brightness change button
Changing lighting area
Press the lighting area change button while the appliance is operating.
1
► 1. Lighting area change button
The lighting area changes every time you press the
lighting area change button as illustrated.
Using with AC power
WARNING:
Never use the appliance when the
cord or plug is damaged.
WARNING:
Do not handle the plug with wet or
greasy hand.
WARNING:
Do not leave the power cord dis-
connected from the appliance while the power is
supplied from the mains. Small children may put the
live plug in their mouth and cause injury.
WARNING:
Do not put the live plug or cord
into your mouth. Doing so might cause an electric
shock.
WARNING:
Make sure that the voltage rating
of the main power supply corresponds with that
of the appliance.
WARNING:
An outlet that is plugged must be
grounded.
When using the appliance with AC power, use the
power cord supplied with the appliance.
Insert the plug to AC inlet of the appliance and then
insert the other end to an outlet.
► 1. Power cord 2. Socket cover (AC inlet) 3. Plug (for
the appliance) 4. Plug (for an outlet)
CAUTION:
Be sure to insert the plug into the
appliance first, then insert the other end to an
outlet.
CAUTION:
Always close the socket cover
firmly when the power cord is not plugged.
NOTE: Even operating in DC power, the appliance
automatically changes to AC power when the power
cord plugged in.
NOTE: The AC power does not charge the battery
inserted to the appliance.
NOTE: The shape of the plug of the power cord var-
ies from country to country.
8 ENGLISH
3
4
1
2