Publicidad
Idiomas disponibles
Idiomas disponibles
3. Wash the filter in warm soapy water,
rinse and dry thoroughly by squeezing
the excess water out of the filter and
allowing to air dry for 24 hours.
NOTE:
DO NOT operate without foam
filter installed.
DO NOT wash in the dishwasher.
DO NOT install foam filter if damp.
4. Reinstall the foam filter into the foam
filter cover and slide it to the slots until it
is in place. Press the cover to lock it into
place until a 'click' can be heard.
HEPA MEDIA EXHAUST FILTER CLEANING
It is recommended to clean the HEPA
media exhaust filter with cold water every
year.
NOTE:
When the cleaning of the filter
no longer restores vacuum cleaner suction
to full power, or the filter is worn or broken,
replace the exhaust filter. To purchase the
exhaust filter, call 1-844-608-3080 (US) /
1-844-608-3081 (CA).
FOAM FILTER CLEANING
Foam Filter
and Foam
Filter Cover
- 20 -
NOTE:
Replace the foam filter if it is
worn or broken.
5. Reinstall the dust bag as outlined in the
DUST BAG REPLACEMENT section (page
18-19).
1. Remove exhaust filter cover by pulling
the tab outward at the bottom of the
cover.
Publicidad
