Publicidad
Step
Step 28
Refer to the enlarged diagram to identify the parts on
å
the HINGES.
The DOORS may need some adjustments. Follow the text below
å
to make needed adjustments.
DOOR ADJUSTMENTS:
å
To adjust the DOORS from side to side (horizontal), turn the
adjusting screw in or out.
To adjust the DOORS up and down (vertical), loosen both vertical
å
adjustment screws. Move the DOORS up or down to the desired
location. Tighten the screws after making adjustments.
To adjust the DOORS in or out (depth), loosen the mounting screw
å
one turn and move the DOORS in or out, as needed. Tighten the
mounting screw after making adjustments.
www.sauder.com/services
Mounting screw (depth)
(vertical adjustment)
420410
Adjusting screw (horizontal)
Page 33
Publicidad
