Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY INSTRUCTIONS
• Never allow unauthorized or untrained persons to operate lift or rolling jacks.
• Shop Policy should prohibit customers or non-authorized persons from being in shop area while lift is in use.
• Thoroughly train all employees in the use and care of lift and rolling jacks.
• Be Sure no one is standing in front or behind lift while vehicle is being driven onto or backed off the lift.
• DO NOT allow rear tires or portion of vehicle to interfere with ramp/chocks.
• Be Sure front wheel stops are in raised position before driving vehicle onto lift.
• Never allow front wheels to strike the front wheel stops.
• DO NOT permit employees or customers on lift when it is either being raised or lowered.
• Always stand clear of lift when raising or lowering and observe "Pinch Points" Warning.
• Never overload lift:
AR14/SM14/ARO14/SMO14 capacity of lift is 14,000 lbs. (6,350 kg.) (7,000 lbs. (3,175 kg.) per axle). CAPACITY
SHOULD NOT BE EXCEEDED.
ARO20 capacity of lift is 20,000 lbs. (9,072 kg.). CAPACITY SHOULD NOT BE EXCEEDED.
• Always engage parking brake and use the rear wheel chocks to keep the vehicle from rolling freely on the
runways.
• Always lower lift on locks before working on vehicle.
• Keep area around lift clean of tools, debris, grease, and oil.
• Always keep runway clean.
• Replace all caution, warning, or safety related decals on the lift when unable to read or missing.
• For Rolling Jack Safety Instructions see Rolling Jack Installation, Operation and Maintenance Instructions in
the rolling jack box.
• Never use work step while lift is in a raised position.
3
Publicidad
