Publicidad
Idiomas disponibles
Idiomas disponibles
Important Safety Instructions
SAVE THESE INSTRUCTIONS
All sections of this manual contain instructions and warnings that should be followed during the installation and use of the SmartRack Enclosures
described in this manual. Read all instructions and warnings thoroughly before attempting to move, install or use the SmartRack Enclosures described
in this manual. Failure to comply will create a risk of personal injury and property damage and may invalidate the warranty.
• Keep the enclosure in a controlled indoor environment, away from moisture, temperature extremes, flammable liquids and gasses, conductive
contaminants, dust and direct sunlight.
• Leave adequate space at the front and rear of the enclosure for proper ventilation. Do not block, cover or insert objects into the external ventilation
openings of the enclosure.
• The enclosure is extremely heavy. Use caution when handling the enclosure. Do not attempt to unpack, move or install it unassisted. Use a mechanical
device such as a forklift or pallet jack to move the enclosure in the shipping container.
• Do not place any object on the enclosure, especially containers of liquid, and do not attempt to stack the enclosures.
• Inspect the shipping container and the enclosure for shipping damage. Do not use the enclosure if it is damaged.
• Leave the enclosure in the shipping container until it has been moved as close to the final installation location as possible. The casters are designed for
minor position adjustments within the final installation area only. The casters are not designed for moving the enclosure over longer distances.
• The casters are not designed to provide long-term support for the enclosure after final installation. Use the levelers to provide long-term support.
• Install the enclosure in a structurally sound area with a level floor that is able to bear the weight of the enclosure, all equipment that will be installed in
the enclosure and any other enclosures and/or equipment that will be installed nearby.
• Install the cabinet securely to the building structure, using the shipping brackets as illustrated in the Enclosure Installation section of this manual.
• Do not push the enclosure from the side panels to move it. Pushing from the side panels will cause a tipping hazard.
• When rolling the enclosure on its casters, always push it from behind, never pull it toward you.
• A rolling enclosure can cause personal injury and property damage if not properly supervised. If rolling the enclosure down a ramp is required, use
extreme caution. Do not attempt to use ramps that have a slope steeper than 1:12.
• Use caution when cutting packing materials. The enclosure could be scratched, causing damage not covered by the warranty.
• Save all packing materials for later use. Repacking and shipping the enclosure without the original packing materials may cause product damage that will
void the warranty.
• Do not re-ship the enclosure with additional equipment unless the enclosure was shipped with a special shock pallet ("SP1" models only). The combined weight of
the enclosure and installed equipment must not exceed the load capacity of the pallet. Tripp Lite is not responsible for any damage that occurs during re-shipment.
• Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support
equipment or to significantly affect its safety or effectiveness is not recommended.
Overview
SmartRack Enclosures accommodate all standard 19-inch rackmount equipment, regardless of vendor, and ship fully assembled for quick and easy
deployment. They feature adaptable, heavy-duty cabinets in 24U, 42U, 45U, 47U and 48U heights, with or without side panels. Several models are
available with an integrated shock pallet that allows resellers, integrators and enterprise customers to pre-configure equipment and re-ship the enclosures
to the final installation site.
SmartRack Enclosures have variable mounting depths, ideal for servers. Integrated baying hardware enables cost-effective, orderly and efficient expansion.
The cabinets include quick-release doors and side panels for convenient maintenance and split rear doors for improved access and reduced clearance
requirements. Front access doors are reversible for installation flexibility. Front and rear doors and side panels are lockable.
Model #
Rack Height
SR24UB
24U
SR24UBEXP
24U
SR24UBEXPSP1
24U
SR24UBSP1
24U
SR25UB
25U
SR42UB
42U
SRX42UB*
42U
SR42UBCL
42U
SR42UBDP
42U
SRX42UBDP*
42U
SRX42UBDPEXP*
42U
SR42UBDPWD
42U
SRX42UBDPWD*
42U
SRX42UBDPWDEXP*
42U
SR42UBEXP
42U
SRX42UBEXP*
42U
SR42UBEXPND
42U
SR42UBEXPSP1
42U
SR42UBSP1
42U
SR42UBWD
42U
*SRX-Series SmartRack Enclosure
20-08-129-932723RevH.indb 2
20-08-129-932723RevH.indb 2
Available SmartRack Enclosures
Side Panels
Shock Pallet
Yes
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
No
No
Yes
No
Yes
No
No
No
No
No
No
No
No
No
No
Yes
Yes
Yes
Yes
No
2
Model #
Rack Height
SRX42UBWD*
42U
SRX42UBWDEXP*
42U
SR42UBWDCL
42U
SR45UB
45U
SRX47UB*
47U
SRX47UBEXP*
47U
SRX47UBDP*
47U
SRX47UBDPEXP*
47U
SRX47UBWD*
47U
SRX47UBWDEXP*
47U
SRX47UBDPWD*
47U
SRX47UBDPWDEXP*
47U
SR48UB
48U
SR48UBCL
48U
SR48UBDP
48U
SR48UBDPWD
48U
SR48UBEXP
48U
SR48UBEXPSP1
48U
SR48UBSP1
48U
SR50UB
50U
SR52UB
52U
SR52UBDP
52U
SR55UB
55U
See the Specifications section for more information.
Side Panels
Shock Pallet
Yes
No
No
No
Yes
No
Yes
No
Yes
No
No
No
Yes
No
No
No
Yes
No
No
No
Yes
No
No
No
Yes
No
Yes
No
Yes
No
Yes
No
No
No
No
Yes
Yes
Yes
Yes
No
Yes
No
Yes
No
Yes
No
8/24/2020 3:54:05 PM
8/24/2020 3:54:05 PM
Publicidad
