Panasonic Lumix H-ES200E Instrucciones De Operación página 9

Note
• Before removing the lens, verify that the digital camera is
turned off. If the lens is removed while the digital camera is
turned on, the focus position will not be stored in the
memory.
Using the Tripod Mount
When using a tripod, attach it to
the tripod mount of the lens.
• We recommend that you
avoid attaching the tripod to
the tripod mount of the digital
camera to prevent lens
damage that may occur when carrying the lens.
• In the following cases, before attaching a tripod, attach the
supplied external tripod mount to the lens:
– When the lens or digital camera comes in contact with
the tripod
– When a battery grip that comes in contact with the tripod
is used
∫
Attaching the external tripod mount (supplied)
1 Insert the external tripod mount
attachment screw into the tripod mount
of the lens. ( 1 )
2 Rotate the external tripod mount
attachment screw in the direction of the
arrows to fasten it firmly.
• Check that the external tripod mount attachment screw is
not loose before use.
• Do not strike or apply strong pressure to the external
tripod mount.
∫
Changing the vertical/horizontal orientation
You can loosen the orientation locking knob ( 1 ) to rotate
the lens together with the digital camera ( 2 ).
This way, you can quickly switch between the vertical and
horizontal orientation while the tripod is in use.
• After changing the orientation, tighten the orientation
locking knob firmly and check that it is not loose.
9
DVQX1304