QSC DPA4.2 Manual Del Usuario página 21

HOME > OUTPUTS > SPKR PROC > CROSSOVER > GAIN/POL > GAIN (ENTER)
Step 2 — Set the Crossover Gain and Polarity
F1: A B C D
Gn/Pol
EQ
HOME > OUTPUTS > SPKR PROC > EQ > BAND 1, 2, 3, 4, or 5 (ENTER)
The graph is a composite of all five bands. Each band has a full range of 20 Hz to 20 kHz.
Step 1 — Set the EQ
F1: A B C D
EN
Band 1
Delay
HOME > OUTPUTS > SPKR PROC > DELAY (ENTER)
Distance measurements are based on the speed of sound being 340 meters/second, or 2.94 milliseconds/meter.
Step 1 — Set the Output Delay Time
F1: A B C D
Outputs > Spkr Proc > Delay
Delay
Limiter
NOTE!: If you select a QSC Loudspeaker, you will see that the limiter is LOCKED. QSC has given these loudspeakers specific limiter
settings tailored for that loudspeaker that should not be changed. If there is a limiter applied in these voicings, you will be able to see the
applied limiter on the graph.
TD-000434-00-B
Output
A
20 dB
-60 dB
Gain Polarity
-5.5 dB POL +
Output
A
20 dB
-60 dB
Type Gain Freq BW
Parametrc -35 dB 100 .01
Output
A
Distance
3.4 meters
11.3 feet
State Time (ms)
Bypass 10.0
+
Gain –100 to +20 dB
–
Polarity + or –
Type: Bypass, Parametric, Low Shelf,
High Shelf (Default Bypass)
Gain: -40 to +20 dB (Default 0.00)
Freq: 20 to 20kHz (Band 1 Def 100 Hz)
(Band 2 Def 500 Hz)
(Band 3 Def 1 kHz)
(Band 4 Def 2.5 kHz)
(Band 5 Def 5 kHz)
BW: 0.01 to 3.00 Octive
(Default 1.00 Oct.)
Delay:
0.0 ms to
75.00 ms
0.021 to 1.0 ms increments
State:
Bypass or
On
21
Scroll to select (Gain or Polarity)
To edit, press
Turn to adjust parameter
To confirm, press
To exit, press
Scroll to select
(Type, Gain, Freq, BW)
To edit, press
Turn to adjust parameter
To confirm, press
To exit, press
Scroll to (Delay Time or Bypass)
To edit, press
Turn to adjust parameter
To confirm, press
To exit, press
ENTER
ENTER
EXIT
ENTER
ENTER
EXIT
ENTER
ENTER
EXIT