QSC DPA4.2 Manual Del Usuario página 26

SAVE
Use this SAVE procedure when you are saving the preset by overwriting the currently active user preset. After you use the SAVE AS feature to save the
preset you are working on, it then becomes the currently active preset, and you can use the SAVE feature to save as you work on the preset.
HOME > PRESETS > PRESET SAVE > SAVE (ENTER)
Step 1 — Overwrite Preset
U1: A B C D
Press ENTER to save preset
Utilities
EN
The Utilities section provides the following amplifier information and functionality:
Amplifier Health
HOME > UTILITIES > STATUS (ENTER)
Step 1 — Check the Amplifier's Health
UTILITY - STATUS
Amp Total Run Time:
Hardware: V12
Firmware: V1.0.22
DC Status: OK
VRail 1: 148V
VRail 2: -150V
Name the Amplifier
HOME > UTILITIES > AMP ID (ENTER)
Step 1 — Name the Amplifier
UTILITY - AMP ID
Serial #:
m
TD-000434-00-B
SAVE
22:37:48 Hrs
Temperature:
CH1 & CH3: 27C
CH2 & CH3: 29C
Power Supply: 24C
123abc Amp ID: my amp ID
Change Amp ID to:
y a m p I D
CONFIRM
Amp Total Run Time:
HH:MM:SS
Hardware version
Firmware version
update thru Amplifier Navigator
DC Status:
VRail 1 = +147VDC +/- 5V typical
VRail 2 = -147VDC +/- 5V typical
Indicates editing
Scroll to desired letter position
Indicates "New
Turn to select desired character
Preset Name"
is selected.
Up to 21 characters
A - Z / a - z / 0 - 9 /
_ / - / space
26
To save, press
To exit without saving, press
To confirm Save, press
Temperature (DPA 4.3 & 4.5)
Thermal Limiting starts at 69ºC
Thermal Shutdown at 80ºC
To edit "Change Amp ID to:" press
press
press
When you are finished, press
Scroll to CONFIRM press
ENTER
EXIT
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER