Samsung WA50M7450A Manual Del Usuario página 22

Installation
Step-by-step installation
STEP 1 Selecting a location
NOTE
Before you install the washer, make sure the location:
• Has a hard, level surface without carpeting or flooring that may obstruct ventilation.
• Is away from direct sunlight.
• Has adequate ventilation.
• Is not exposed to freezing temperatures (temperatures under 32 °F or 0 °C).
Is away from heat sources such as oil or gas.
•
• Has enough space so that the washer doesn't rest on its power cord.
STEP 2 Connecting the water supply hoses
22 English
DC68-03774H-05_IB_WA7000M_EN.indd 22
CAUTION
• Before installing the water supply hoses,
make sure there are rubber gaskets (B)
inside the couplings (A) at both ends
of each new water hose. Installing the
water supply hoses without rubber
gaskets can cause water leakage.
• When you initially install the washer,
be sure to use new hoses. Failing to
B
do so may result in a water leakage
or overflow and may damage your
property.
A
• Do not connect multiple water supply
hoses together to increase the length of
the supply hose. Hoses connected this
way can leak and the leakage can cause
electrical shock. If a hose is too short,
replace the hose with a longer, high
pressure hose.
2023-06-22 4:56:13