STEP 4 Leveling your washer
B
DC68-03774H-05_IB_WA7000M_EN.indd 27
A
C
See if the washer is level by checking the
position of the tub:
1. Slide the washer into position.
2. Open the lid of the washer, and pour
the water into the tub to just below the
pulsator level.
3. If the washer is level, the pulsator (A)
will be positioned at the center of the
water as shown in the figure.
If it isn't, level your washer by turning
the front leveling feet clockwise or
counterclockwise as necessary.
NOTE
Turn the front leveling feet clockwise (B) to
lower the washer, and counterclockwise (C)
to raise the washer.
English 27
2023-06-22
4:56:14