Samsung WA50M7450A Manual Del Usuario página 32

Operating instructions
Getting started
1. Load your washer.
2. Add liquid (or powder) detergent and additives to the dispenser (see the "Detergent use"
section on page 42).
3. Select the appropriate cycle and options for the load (see the "Washing a load of laundry"
section page 33).
4. Close the lid.
5. Press START/PAUSE.
6. The Wash Indicator illuminates.
7. The estimated cycle time will appear in the display.
The time may fluctuate to indicate the time remaining in the cycle.
NOTE
The actual time required for a cycle may differ from the estimated time in the display
depending on the water pressure, water temperature, detergent, and laundry.
8. Before your washer starts to fill, it will make a series of clicking noises to check the door
lock and do a quick drain.
NOTE
• When the cycle is complete, the
(WA50M7450A* / WA50N7250A*) / "0" (WA45M7050A*) will appear in the display.
Pressing POWER cancels the cycle and stops your washer.
•
• The Wash, Rinse, and Spin indicators will illuminate during those portions of the cycle.
32 English
DC68-03774H-05_IB_WA7000M_EN.indd 32
Door Lock indicator will go out and "End"
2023-06-22 4:56:15