Mitsubishi Heavy Industries SC-SL4-AE Manual Del Propietário página 16

<When running and stopping each group>
3.
Press the icon of the group for which settings are to be made.
The frame turns red.
When you want to cancel, please press the icon again.
4. ● To run units
Press the RUN button, and press the Yes button on the confi rmation screen.
The selected group starts running.
● To stop units
Press the STOP button, and press the Yes button on the confi rmation screen.
The selected group stops running.
When you do not want to set, press the No button.
<When making settings and changes on each group>
5.
Press the icon of the group for which settings or changes are to be made.
The frame turns red.
6.
Press the CHANGE button.
The CHANGE GROUP screen is displayed. When the screen changes, no items are
selected. Set only the items that are to be set or changed.
[CHANGE GROUP screen]
7. Press the button for the item to set or change.
• RUN/STOP/HOME LEAVE ON/HOME LEAVE OFF
Press the RUN, STOP,
– When the RUN button is selected, the operation starts, and when the STOP button is
selected, the operation stops.
– When the
* MODE and SET TEMP. cannot be set.
– When the
• MODE
Select
– Auto Mode can be valid in the FUNCTION SETTING.
This function can be applied to the indoor units, which are the cooling/heating free
multi KXR, single split PAC.
button is selected, Home leave operation starts.
button is selected, Home leave operation stops.
Auto, Cool, Dry,
(Individual lock/unlock settings valid in
FUNCTION SETTING)
7
8
This function can be applied to the indoor
units, which are the model KXE4 or later,
and to the wired remote controller, which
is the model RC-E1 or later.
or button.
Fan or Heat by pressing the button.
– 15 –
page 68