Mitsubishi Heavy Industries SC-SL4-AE Manual Del Propietário página 32

Calculating Settings (SC-SL4-BE only)
■ Setting the unit defi nition
Set the unit defi nition on the MAINTENANCE MENU.
If you want to change the initial settings confi gured at the time of installation, contact your dealer.
■ Setting the period for calculation
1.
Press the ACCOUNTING PERIOD TIME button on the OPERATOR MENU screen.
page 10
3
<When you choose "Internal" for Period Time Switch>
You can divide a day into four periods for calculation.
If it is not necessary to divide the period into four parts, you can set 0:00 - 24:00 as TIME 1.
2.
Press the Internal button.
3.
Press the hour and minute buttons for the start time or the end time.
Input the time.
When you input TIME 2 or TIME 3, press the VALID button.
4.
Press the SET button. Press the Yes button on the confi rmation screen.
When you do not want to set, press the No button.
Note
• TIME 4 is all time except TIME 1, 2 and 3.
– Example 1
If you set 8:00-17:00 as TIME 1, TIME 4 is 0:00-8:00 and 17:00-24:00.
– Example 2
If you set 8:00-12:00 as TIME 1, 12:00-17:00 as TIME 2 and 17:00-24:00 as TIME 3, TIME
4 is 0:00-8:00.
<When you choose "External" for Period Time Switch>
You can set the accounting period time by using the external input.
5.
Press the External button.
6.
Press the SET button. Press the Yes button on the confi rmation screen.
When you do not want to set, press the No button.
page 61
– 31 –
2, 5
4, 6
page 71