Mitsubishi Heavy Industries SC-SL4-AE Manual Del Propietário página 17

• SET TEMP.
Press
• FAN
Select (Powerful),
button.
– When using automatic mode, valid the AUTO FAN on the FUNCTION SETTING.
– When using powerful mode, select 4-speed for FAN TYPE on the GROUP
DEFINITION DETAILS screen.
(Powerful mode)
Operates with the maximum fan speed.
It is suitable for heating or cooling the entire room thoroughly.
• Air direction
Select Auto, stop 1, stop 2, stop 3 or stop 4 and press the button.
• Lock
Press or
If is pressed, remote controller operations are permitted, and if
prohibited.
• FILTER RESET
If the
• Energy Saving
Press the ON or OFF button.
– When the ON button is selected, energy saving operation starts.
– When the OFF button is selected, energy saving operation stops.
Use this operation to save energy. A unit shifts its set temperature by outside
temperature.
8.
Press the SET button. Press the Yes button on the confi rmation screen.
When you do not want to set or change, press the No button.
Note
• If the BACK button is pressed, it returns to the previous screen.
• If individual lock/unlock is valid in the MAINTENANCE MENU, it is possible to set the remote
controller operations to permit or prohibit each item such as run/stop, mode and temperature
setting.
• When individual lock/unlock are valid in the MAINTENANCE MENU, remote controller
operations are prohibited if run/stop, mode and temperature setting are all
functions, such as reset of the fi lter sign have been permitted.)
• RUN is indicated when at least one unit is running.
Malfunctions are indicated when at least one unit is not in good condition.
STOP is indicated when all the units have stopped.
HOME LEAVE is indicated when at least one unit is set for home leave.
• Operating mode, temperature setting, room temperature, fan speed and air direction show
the state of the representative unit.
• Groups that have the current day's schedule settings show
• icon is displayed when at least one unit needs cleaning fi lter.
• icon is displayed when at least one unit needs maintenance.
• icon is displayed when the group is the target for energy saving.
• icon is displayed when the group is the target for silent mode.
or . page 50 (TEMPERATURE RANGE SETTING)
(High),
.
button is pressed, the fi lter sign turns off.
page 51
(Medium), (Low), or
– 16 –
(AUTO), and press the
is pressed, they are
. (Some
.