Mitsubishi Heavy Industries SC-SL4-AE Manual Del Propietário página 37

■ Saving the settings
19.
Press the SET button. Press the Yes button on the confi rmation screen.
The group settings are saved. When you do not want to save the settings, press the No
button.
Note
• When you will delete all group defi nition, press the DELETE ALL SETTINGS button and enter
your password. Press the Yes button on the confi rmation screen. All Schedule settings are
deleted too.
• 1 to 16 units can be registered in a group.
Attention
If an unconnected air conditioner is registered in a group, a "Communication error" may occur,
affecting communication of the whole system and causing an unintended operation to be
performed. Do not register unconnected units in a group.
Also note that, at the initial setting, one air conditioner is registered in one group in advance. If
the unit is an unconnected unit, it must be deleted individually. It is recommended that, when
registering new groups, you press the "DELETE ALL SETTINGS" button to delete all groups
once, and then register groups for connected units. That certainly is an easier way to confi gure
the settings as well as a sure method to prevent communication errors.
– 36 –